Replacement & Repair of Any Make

Name: Replacement & Repair of Any Make
Brand: Anand Gears

Drop-in replacements matched to your existing mounting and shafts — plus rebuilds, re-shafting, and re-gearing when the original brand is slow, obsolete, or overpriced.

Anand Gears drop-in replacement industrial gearbox

Service & Spares

Matched Replacements — Not Catalogue Compromises

When a line is down, the useful data is on the mounting feet and shaft ends, not on the brand logo. Anand Gears manufactures drop-in replacement gearboxes matched to your existing unit’s mounting pattern, centre distance, ratio, and shaft geometry. We also repair and rebuild housings, re-cut worms and wheels, and reverse-engineer from samples when drawings are missing.

Drop-in replacements matched to mounting and shafts

Rebuild: re-bore, re-shaft, re-gear, reseal

Work from sample, sketch, or measured dims (mm)

Worm, helical, bevel, and planetary service

Obsolete ratio and imperial-CD equivalents (built in mm interfaces where possible)

Material test certificates when the project requires them

Process

How a Drop-In Replacement Is Built

Capture the interface — foot bolt pattern, CD, shaft diameters and lengths, keyways, and mounting orientation (all in mm).
Confirm ratio and duty — from nameplate if legible, or from measured gear teeth / process speed.
Choose path — new matched unit vs rebuild of the existing housing.
Machine and inspect — shafts, bores, and gear set; seal and paint to duty.
Ship ready to bolt down — same centreline, no new foundation work.

FAQ

Replacement & Repair of Any Make — Common Questions

Do you need the original brand name to build a replacement?

No. We need the mechanical interface — mounting, CD, ratio, and shafts. Brand names are irrelevant to the manufacturing drawing.

Can you repair our existing gearbox instead of replacing it?

Often yes. We inspect the housing, bearings, and gear set and quote rebuild versus new based on what is salvageable.

What if the nameplate is missing?

Measure centre distance, count teeth or measure process speeds for ratio, and record shaft ends in millimetres. Our nameplate decoding guide explains what to photograph if a plate still exists.

Budgetary offer — Gearbox Replacement & Repair

Tell us the duty and we’ll send you a number

Power, input speed, and either the ratio or the output speed you need are usually enough to start. Our engineers reply on the same working day.

Have a nameplate photo, a drawing, or the old unit in front of you? Send it on WhatsApp — that is the fastest route to a number.

Prefer to talk? +91 98203 83719 or +91 98205 18093.