What is a geared motor?

A geared motor is an integrated unit combining an electric motor and a gearbox into a single compact package. Instead of purchasing and assembling a motor and gearbox separately, a geared motor comes pre-engineered, pre-aligned, and ready to install. The motor (typically IEC standard AC or DC) drives the gearbox shaft directly, reducing installation time and potential alignment errors. Anand Gears geared motors are available with worm, helical, or helical-worm gearbox configurations and power outputs from 0.12 kW to 30 kW.

What are the advantages of integrated geared motors?

Geared motors offer multiple advantages: (1) Reduced assembly time and cost compared to sourcing motor and gearbox separately. (2) Precise pre-alignment eliminates installation guesswork and reduces coupling failures. (3) Compact footprint — single unit vs. two separate components. (4) Quality assurance — the entire drive system is engineered and tested as a unit. (5) Simplified procurement — single part number vs. multiple items to order and track. (6) Warranty coverage — single entity responsible for performance. Ideal for OEMs and large-scale production environments where standardization and reliability are critical.

When should I choose a geared motor over a motor + gearbox combination?

Choose a geared motor when: (1) You need a turn-key solution with minimal assembly. (2) Space is limited and a compact package is required. (3) You're building machines in high volume and value standardization. (4) Installation complexity should be minimized to reduce field errors. (5) You want single-source warranty and support. Choose separate motor + gearbox when: (1) Custom configurations or special flange patterns are required. (2) The motor or gearbox needs upgrading independently. (3) You require specialty motors (high-temperature rated, marine-duty) not typically available on pre-assembled units.

Geared Motors | Anand Gears

Name: Geared Motors
Brand: Anand Gears

Anand Gears integrated geared motor assembly

Integrated Solutions

Turn-Key Geared Motor Solutions for Automated Production

Anand Gears geared motors eliminate the complexity of sourcing and assembling separate motor and gearbox components. Each unit arrives fully pre-engineered, pre-aligned, and factory-tested, ready for immediate installation into your machinery. Available in power ratings from 0.12 kW to 30 kW with three gearbox configurations — worm, helical, or helical-worm combinations — our geared motors reduce installation time, minimize alignment errors, and ensure system reliability. Choose from foot-mounted, flange-mounted, or shaft-mounted configurations to match your equipment footprint and connection requirements.

Fully integrated motor and gearbox assembly

Power 0.12–30 kW with multiple configurations

Foot, flange, and shaft-mounted options

Worm, helical, and helical-worm variants

Factory-tested and quality-assured

Rapid deployment with minimal assembly

Product Variants

Geared Motor Types

Three core configurations to match any speed and torque requirement.

Worm Geared Motors

Compact, self-locking geared motors with high torque multiplication. Ideal for conveyor drives, mixers, and lift systems where load-holding without external brake is required. Available in power ratings 0.12–15 kW.

Power Range 0.12–15 kW

Self-Locking Yes (ratios >5:1)

Best For Compact, load-holding applications

Helical Geared Motors

High-efficiency parallel shaft motors for continuous-duty applications. Smooth, quiet operation with efficiency >95%. Power ratings 0.25–30 kW, ideal for conveyors, pumps, and industrial drives.

Power Range 0.25–30 kW

Efficiency >95%

Best For Continuous-duty, high-efficiency drives

Helical-Worm Combo Motors

Two-stage reduction combining helical primary with worm secondary for high ratio reduction in compact space. Power 0.37–22 kW, ideal for synchronized lifting and multi-point drive systems.

Power Range 0.37–22 kW

Reduction Type Two-stage (high ratio)

Best For Synchronized multi-jack lifts

Selection Guide

Reduction Stages at a Glance

The number of gear stages sets the practical ratio band — pick the band first, then the frame size for your torque.

Stages	Typical Ratio Band	Typical Output Duty
Single stage helical	up to ~6:1	High-speed drives, fans, light conveyors
Two stage helical	~6:1 – 25:1	General machinery, mixers, conveyors
Three stage helical	~25:1 – 130:1	Slow, high-torque drives, agitators
Helical-worm / helical-bevel combinations	beyond 130:1	Very slow output, right-angle layouts, self-locking needs

Bands are typical for standard builds — exact ratios and frame sizes are confirmed against your duty point at the budgetary-offer stage.

Installation Flexibility

Mounting Configurations

Multiple mounting solutions to fit your equipment layout and space constraints.

Foot-Mounted

Traditional base mounting with bolt-down feet. Easy installation on flat surfaces. Standard in most industrial environments. Vibration isolation mounts optional for noise reduction.

Flange-Mounted

Direct mounting to equipment with bolt holes. Eliminates separate coupling. Compact installation on conveyor drives, pump housings, and gearbox inputs. Space-saving alternative to foot mounting.

Shaft-Mounted

Motor couples directly to driven equipment shaft (e.g., conveyor pulley). Eliminates separate output coupling. Reduces component count and installation complexity. Perfect for retrofit or upgrade applications.

Industry Solutions

Geared Motor Applications

Proven in automated production lines, material handling, and conveyor systems worldwide.

Automated Production Lines

Drive systems for conveyor belts, packaging machinery, and material transfer. Standardized geared motors reduce procurement complexity across multiple machines. Consistent performance ensures production synchronization.

Conveyor Systems

Belt conveyor head drives, accumulator conveyors, and inclined transport systems. Geared motors provide the smooth torque curve essential for load control on ramps.

Material Handling Equipment

Stackers, tier conveyors, and level control systems. Compact geared motors fit tight spaces while delivering reliable torque for load lifting and positioning.

Packaging Machinery

Format changeover systems, film advance drives, sealing bar positioning. Food-grade stainless steel variants with NSF H1 lubricants available for direct food contact applications.

Industrial Mixers

Heavy-duty mixers for concrete, paint, chemicals, and food products. High-torque worm geared motors provide steady, controlled mixing action without shock loads.

Pump Drive Systems

Centrifugal and gear pump drives, fluid transfer systems. Helical geared motors with >95% efficiency minimize energy losses in 24/7 pumping applications.

Pricing & Availability

Anand Gears Geared Motors are competitively priced for the Indian market. Pricing depends on motor rating, gearbox type, and customisation.

Starting From

₹5,000

0.12–0.5 kW Units

Mid-Range

₹20,000

1–5 kW Motors

Industrial

₹85,000+

10–25 kW Units

Prices are indicative and vary based on specifications. GST extra. Contact us for a budgetary offer against your exact specification.

Get Exact Quote

Complete the Drive Chain

A geared motor plus its matched VFD and starter panel arrives as one tested package — parameters set, overloads dialled to the real motor, documentation included. One purchase order, one point of responsibility.

VFD Drives → Control Panels & Starters → All Automation →

Budgetary offer — Geared Motors

Tell us the duty and we’ll send you a number

Power, input speed, and either the ratio or the output speed you need are usually enough to start. Our engineers reply on the same working day.

Have a nameplate photo, a drawing, or the old unit in front of you? Send it on WhatsApp — that is the fastest route to a number.

Prefer to talk? +91 98203 83719 or +91 98205 18093.

Geared Motors